Resin power trowel
The Wand
A lightweight trowel designed for finishing resinous surfaces like resin bound stone , epoxy stone carpets and PU screeds. Due to its light weight and possibility of extending the handle it can be successfully used in early finishing of concrete allowing faster installation. Additional weights are included, which can be added when the material requires better compaction . Works great on any resin bound material – stone, rubber and many epoxy coatings as well. Results in an unrivalled finish that cannot be achieved by hand trowelling or with heavier machines. Can be used after hand trowel application to remove trowel marks, or with weights and by experienced operatives, straight from the screed sledge.Specifications
| The Wand TECHNICAL DATA | |
| WEIGHT | 14-18 KG |
| TROWEL DIAMETER | 86 CM |
| NUMBER OF BLADES | 3 or 4 |
| BLADE PITCH | 5 DEGREES |
| RANGE OF SPEED RPM | 0 – 60 |
| ENGINE TYPE | HONDA AIR COOLED >4 CYCLE 25cc&35cc |
| ANODIZED ALUMINUM | 35mm SNAP POLE |
| SHIPPING WEIGHT | 55 KG |
| PACKAGE SHIPPING DIMENSIONS | 120cm X100cm X 70cm |
| FINISH BLADES | PVC & Stainless Steel |
Each machine is sold with
- 3 X 1.25KG WEIGHTS
- A SET OF PVC BLADES
- A SET OF STAINLESS STEEL BLADES
- TWO 1.8m ALUMINUM SNAP POLES
Applications
Resin driveways, resin patios, resin swimming pool surrounds and more. Works great on any flat work and is ideal for decorative concrete, stamping, epoxy, polymers, rubber products and special textures and finishes that cannot be achieved with a heavy machine.
Advantages
- Made in the UK
- Affordable trowel blades
- Protective cover for motor
- Translucent fuel tank – allows user to see fuel level while operating
- Sealed transmission – no maintenance
- Needle bearings input and output transmission
- Throttle control rotating handle
- Non corrosive Stainless Steel and Aluminium parts
Product image gallery
